Mecmar Tower Dryer

Products - Tower Dryers

Mecmar Continuous flow Dryers

Load from above and discharge from below
They prefer big areas but can adapt perfectly to small spaces
High daily outputs (from 100 tons up to 2000 tons per day)
Various types of fuel
Electrical operation

The drying process is divided into 4 phases which correspond:

LOAD
DRY
COOL
DISCHARGE

The damp product enters from the top, passes through the machine.
Heat recovered from the grain during cooling greatly reduces fuel consumption. Grain temperature is reduced gradually, preventing damage by thermal shock to the kernel. Grain reaches the discharge area perfectly clean and cooled to room temperature so that it can be stored in total safety and without any problems.

Model		RT
Diameter	(m)	2.5
Height	(m)	8 - 14
Capacity	(t)	11 - 17
Capacity	(m³)	15 - 27
Daily output (from 20% to 15%)	(t/24h)	166 - 344
Details

Model		RM
Diameter	(m)	3.5
Height	(m)	11 - 24
Capacity	(t)	24 - 54
Capacity	(m³)	33 - 72
Daily output (from 20% to 15%)	(t/24h)	288 - 840
Details

Model		RG
Diameter	(m)	5.3
Height	(m)	19 - 24
Capacity	(t)	70 - 90
Capacity	(m³)	94 - 120
Daily output (from 20% to 15%)	(t/24h)	960 - 1440
Details

Machine photos, dimensions and capacities are as an indication and can be modified by the manufacturer without prior notice. Some machine details could be different from these photos and specifications. Confirmation of specifications can be requested during the preliminary order phase. Mecmar continues to innovate and improve its current products in order to remain the gold standard on the world scene.

Outputs are specified in tons of damp grain (husked in case of corn) with the specified humidity contents. Outputs are estimates based on drying principles, field results and computer simulations. Outputs can vary due to grain physiological factors (kernel size, chemical composition, variety, degree of ripeness), excessive impurities, adverse weather, etc.